PHOTOBOOTH LENTICULAR INFORMATION

Step by Step setup sheets for LA Photo Party PUB Software using VueThru 40 and 60 LPI Lenticular Lens, both Lenticular Lens with Adhesive or Lenticular Photo Frames.  (60 LPI Below)

Other Information

 

*Note* All Lenticular Lens and Frames are capable of doing all lenticular effects, Flip, GIF, Morph, Zoom, Animation, and 3D but to varying degrees.  Meaning, all lenticular lens will do a Flip, but some lenticular lens and frames will do a better Flip than others.  Our 40 LPI works better for a 3 image GIF than our 60 LPI, but the transition between images of a 40 LPI can look coarse or choppy compared to a 60 LPI because there are 50 percent more lines in a 60 LPI lens (lines per inch) than a 40 LPI.  This is not resolution, just more lines!  Your graphic images can effect lenticular image quality.  Our 60 LPI is better for a 3D and 2 image Flip and Morphs.  Software is what makes the Lenticular Effects!  Some software calls a FLIP a GIF or others call a Morph an Animation.  Our lenticular lens and frames will work with most lenticular interlacing software.  Have questions - Ask!

 

 

*Notice* The VueThru 40 LPI 4x6 with 4 Inch Lines Lenticular Photo Frames are the same but used (named) differently with different software programs. The 40 LPI can be used for Flip, GIF, and Morph. The VueThru 60 LPI 4x6 with 4 Inch Lines Lenticular Photo Frames are the same but used (named) differently with different software programs.  The 60 LPI can be used for Flip, Animation, Morph, Zoom, and 3D. The 60 LPI 6x8 with 8 Inch Lines is only used for 3D.

 

These Lenticular Photo Frames and Lenticular Lens with Adhesive have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing video (link below) and with Catalina Viau's Lenticular Module on her Photo Booth Mastery Course. (link below).  Other dye sub photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

*Also see EXHIBITION LENTICULAR MATERIALS for tested Lenticular Materials that work with Lenticular Interlacing Software PhotaMate Pro, 3DMasterKit, and 3DLiveVue.

 

What are Lenticular Photo Frames?

Professional Event Photographers and Photo Booth Owners using DNP Professional Printers and Lenticular Interlacing Software will find they can create GIF, Flip, Morph, and 3D Lenticular Souvenirs fast and easy, using our Lenticular Photo Frames.

 

Uses:

40 LPI 4 Wide x 6 Tall with Horizontal lines Lenticular Photo Frames are the favorites of Photo Booth Operators using DNP DS40, DS620 and RX1 dye sub printers 4x6 media kits for a GIF and Flip and Morph Lenticular Photo with Photo Booth Software like PBU for GIF Flip Morph Lenticular Prints. (Other printers and software may work.  Always test test test, before your events!)

 

60 LPI 4 Wide x 6 Tall with Horizontal lines Lenticular Photo Frames are the favorites of Photo Booth Operators using DNP DS40, DS620 and RX1 dye sub printers using 4x6 media kits for Flip and GIF and Morph Photos with Photo Booth Software like PBU for GIF / Animation / Morph Lenticular Prints.  (Other printers and software may work.  Always test test test, before your events!)

 

60 LPI 6 Wide x 4 Tall with Vertical lines Lenticular Photo Frames are the favorites of Photo Booth Operators using DNP DS40, DS620 and RX1 dye sub printers using 4x6 media kits for 3D Photos with Photo Booth Software like PBU for Green Screen 3D Lenticular Prints and PhotaMate Pro for Event 3D Photos.  (Other printers and software may work.  Always test test test, before your events!)

 

6 Wide x 8 Tall with Vertrical lines Photo Frames are the favorites of Profession Event Photographers using DNP DS40, DS620 and RX1 dye sub printers using 6x8 media kits for Portrait 3D Souvenir Photos with Event Software like PhotaMate Pro for 3D Photos.  (Other printers and software may work.  Always test test test, before your events!)

 

WARNING: DNP DS40, DS620 and RX1 Professional Printers will NOT print a 4x6 with 6 Inch Lines, Landscape with Horizontal Lines or Portrait with Vertical Lenticular correctly with a 4x6 Media Kit.

 

Example a 6 wide x 4 tall with 6 Inch Horizontal Lines Landscape Flip or GIF Lenticular will NOT print correctly with a 4x6 Media Kit!

 

You will need to print the photo using a 5x7 or 6x8 Media Kit, attach with Adhesive and trim out!  Also will NOT print a 6x8 with 6 Inch Lines correctly with a 6x8 Media Kit.  You will need to print using a DNP DS80 or DS820. This is true on most dye sub printers! Test Test Test before your event!

 

HS code 3924.90.2000 Picture frames of plastics.

 

*Note* The VueThru 40 LPI 4x6 with 4 Inch Lines Lenticular Photo Frames are the same but used (named) differently with different software programs. The 40 LPI can be used for Flip, GIF, and Morph.

 

The 40 LPI 4x6 with 4 Inch Lines GIF or Flip Lenticular Photo Frame work for both GIF and Flip Lenticular products when used with LA Photo Party PBU Software.

 

These GIF or Flip Lenticular Photo Frames and Lenticular Lens with Adhesive have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 4x6 Media Kits using LA Photo Party - PBU Software video (link below) and with Catalina Viau's Lenticular Module on her Photo Booth Mastery Course. (link below).  Other dye sub photo printers and Lenticular Interlacing Software may work.  Test Test Test before your event!

 

PBU links:

GIF overview:

https://support.laphotoparty.com/support/solutions/articles/5000858776

 

Lenticular overview:

https://support.laphotoparty.com/support/solutions/articles/5000852772-getting-started-with-lenticular-printing

 

Morph overview:

https://support.laphotoparty.com/support/solutions/articles/5000858780

 

Catalina Viau's Photo Booth Mastery Course link:

https://bit.ly/vt-pbm

 

Attaching using Lenticular Photo Frame. (the video shows a 3D Photo Frame, but the process is the same for all Photo Frames)  When using a dye sub printer triming is not necessary.

https://vuethru.com/videos_laminating.html

 

Attaching Lenticular Lens with Adhesive using a Laminator:

https://www.vuethru.com/videos_laminating2.html

 

These Lenticular Photo Frames and Lenticular Lens with Adhesive have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing video (link below) and with Catalina Viau's Lenticular Module on her Photo Booth Mastery Course. (link below).  Other dye sub photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

*Also see EXHIBITION LENTICULAR MATERIALS for tested Lenticular Materials that work with Lenticular Interlacing Software PhotaMate Pro, 3DMasterKit, and 3DLiveVue.

 

40 LPI GIF or Flip 4X6 with 4 Inch Lines Lenticular Photo Frame with Silicone Band.

 Portrait: Size - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

  Landscape: Size - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party Upload and Catalina Bloch)

 PhotaMate Pro Event Photography software using 39.85 as LPI setting

 Triaxes 3D MasterKit software using 39.85 as LPI Setting

 SuperFlip Lenticular Interlacing software using 39.85 as LPI for dye sub printing

 GIF Flip Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRXHS1 with 4x6 Media Kit using 39.85 as LPI

 Ink Jet - Canon, Epson, HP and Primera IP60 Photo using 39.95 - 40.08 as LPI

 

GIF or Flips's using 40 LPI with Horizontal Lines are easier to make and look better, but your project may require a Vertical Flip.  The 40 LPI GIF Flip Photo Frames is the better choice for Vertical Flips. 40 LPI GIF Flips's are easier to make than 60 LPI Flips's but the 60 LPI Horizontal GIF Flip’s may show a smoother Flip transition.  We do not recommend 60 LPI for Vertical GIF Flip’s.

 

Training:

SuperFlip Cat and Mouse Project https://vuethru.com/cat-mouseproject.html

LA Photo Party link: GIF Flip overview: https://support.laphotoparty.com/support/solutions/articles/5000858776-create-a-lenticular-print-from-a-gif

 

VueThru Lenticular Photo Frames are used around the world at Amusement Parks, Aquariums, Exhibitons, Corporate Events, Birthday parties.  Any where Event and Photo Booth Photographers are, you can find VueThru Lenticular Photo Frames!

 

40 LPI 4x6 with 4 Inch lines are used for Portrait Flip and Morph with Photo Booth Software like PBU for Animation / Morph Lenticular Prints.

No attaching or lamination required, just slide in printed (interlaced) photo.

Nothing Easier than Photo Frames!

 

HS code 3924.90.20 Picture Frame of plastics.

 

40 LPI Lenticular Photo Frames have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 6 inch wide 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing. Other dye sub and inkjet photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

40 LPI GIF or Flip 4X6 with 4 Inch Lines Lenticular Photo Frame with Silicone Band.

 Portrait: Size - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party Upload and Catalina Bloch)

 PhotaMate Pro Event Photography software using 39.85 as LPI setting

 Triaxes 3D MasterKit software using 39.85 as LPI Setting

 SuperFlip Lenticular Interlacing software using 39.85 as LPI for dye sub printing

 GIF Flip Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

Portrait GIF or Flips's using 40 LPI with Horizontal Lines are easier to make, but your project may require a Vertical Flip.  The 40 LPI GIF Flip Photo Frames is the better choice for Vertical Flips. 40 LPI GIF Flips's are easier to make than 60 LPI Flips's but the 60 LPI Horizontal GIF Flip’s may show a smoother Flip transition.  We do not recommend 60 LPI for Vertical GIF Flip’s.

 

VueThru Lenticular Photo Frames are used around the world at Amusement Parks, Aquariums, Exhibitons, Corporate Events, Birthday parties.  Any where Event and Photo Booth Photographers are, you can find VueThru Lenticular Photo Frames!

 

40 LPI 4x6 with 4 Inch lines are used for Portrait Flip and Morph with Photo Booth Software like PBU for Animation / Morph Lenticular Prints.

No attaching or lamination required, just slide in printed (interlaced) photo, align, and hand ot guest!

 

Nothing Easier than Photo Frames!

 

LA Photo Party link:

https://support.laphotoparty.com/support/solutions/articles/5000858776-create-a-lenticular-print-from-a-gif

 

Catalina Viau's Photo Booth Mastery Course link:

https://bit.ly/vt-pbm

 

Attaching using Lenticular Photo Frame. (the video shows a 3D Photo Frame, but the process is the same for all Photo Frames)  When using a dye sub printer triming is not necessary.

https://vuethru.com/videos_laminating.html

 

Training:

SuperFlip Cat and Mouse Project https://vuethru.com/cat-mouseproject.html

LA Photo Party link: GIF Flip overview: https://support.laphotoparty.com/support/solutions/articles/5000858776-create-a-lenticular-print-from-a-gif

 

*Also see EXHIBITION LENTICULAR MATERIALS for tested Lenticular Materials that work with Lenticular Interlacing Software PhotaMate Pro, 3DMasterKit, and 3DLiveVue.GIF or Flip Lenticular Lens with Adhesive - 40 LPI 4x6 with 4 Inch Lines

 Portrait - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

  Landscape - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party and Catalina Bloch)

 Gif or Flip Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRX1HS with 4x6 Media Kit

 Ink Jet - Primera IP60 Photo

 

GIF or Flip using 40 LPI with Horizontal Lines are easier to make and look better, but your project may require a Vertical GIF or Flip.  The 40 LPI Lens is the better choice for Vertical GIF or Flips. 40 LPI GIF or Flips are easier to make than 60 LPI GIF's or Flips but the 60 LPI Horizontal GIF Flips may show a smoother Flip transition.

 

Training: LA Photo Party link: GIF overview:

https://support.laphotoparty.com/support/solutions/articles/5000858776-create-a-lenticular-print-from-a-gif

 

40 LPI 4X6 //4 (10.2x15.2 cm) Ready to Apply GIF Flip Lenticular Lens Blanks with Optically Clear Adhesive applied.

 

Go to LA Photo Party for GIF Lenticular Training.

 

HS code 39.19 Self adhesive sheets of plastics.

 

40 LPI Lenticular Lens has a 49° Viewing Angle and are .033" Thick, and 60 LPI Lenticular Lens has a 35° Viewing Angle and are .028" Thick.

 

 

40 LPI Lenticular Lens with Adhesive has been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 6 inch wide 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing. Other dye sub and inkjet photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

40 LPI GIF or Flip 4X6 with 4 Inch Lines Lenticular Lens with Adhesive.

 Portrait: Size - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

 

Popular uses (but not limited to)

 PBU Software  (LA Photo Party PBU and Catalina Bloch)

 PhotaMate Pro Event Photography software using 39.85 as LPI setting

 Triaxes 3D MasterKit software using 39.85 as LPI Setting

 SuperFlip Lenticular Interlacing software using 39.85 as LPI for dye sub printing

 GIF Flip Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

Portrait GIF or Flips's using 40 LPI with Horizontal Lines are easier to make than 60 LPI Flips's but the 60 LPI Horizontal GIF Flip’s may show a smoother Flip transition, but your project may require a Vertical Flip.  The 40 LPI GIF Flip Lenticular Lens with Adhesive is the better choice for Vertical Flips. We do not recommend 60 LPI for Vertical GIF Flip’s.

 

3D

 

*Note* The VueThru 60 LPI 4x6 with 4 Inch Lines Lenticular Photo Frames are the same but used (named) differently with different software programs.  The 60 LPI can be used for GIF, Flip, Animation, Morph, Zoom, and 3D.

 

The 60 LPI 4x6 with 4 Inch Lines GIF Flip Morph or 3D Lenticular Photo Frame work for both GIF Flip Morph and 3D Lenticular products when used with LA Photo Party PBU Software.

 

These GIF Flip Morph or 3D Lenticular Photo Frames and Lenticular Lens with Adhesive have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 4x6 Media Kits using LA Photo Party - PBU Software video (link below) and with Catalina Viau's Lenticular Module on her Photo Booth Mastery Course. (link below).  Other dye sub photo printers and Lenticular Interlacing Software may work.  Test Test Test before your event!

 

PBU links:

Morph overview:

https://support.laphotoparty.com/support/solutions/articles/5000858780

 

Lenticular overview:

https://support.laphotoparty.com/support/solutions/articles/5000852772-getting-started-with-lenticular-printing

 

GIF or Flip overview:

https://support.laphotoparty.com/support/solutions/articles/5000858776

 

Catalina Viau's Photo Booth Mastery Course link:

https://bit.ly/vt-pbm

 

Attaching using Lenticular Photo Frame. (the video shows a 3D Photo Frame, but the process is the same for all Photo Frames)  When using a dye sub printer triming is not necessary.

https://vuethru.com/videos_laminating.html

 

Attaching Lenticular Lens with Adhesive using a Laminator:

https://www.vuethru.com/videos_laminating2.html

 

These Lenticular Photo Frames and Lenticular Lens with Adhesive have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing video (link below) and with Catalina Viau's Lenticular Module on her Photo Booth Mastery Course. (link below).  Other dye sub photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

*Also see EXHIBITION LENTICULAR MATERIALS for tested Lenticular Materials that work with Lenticular Interlacing Software PhotaMate Pro, 3DMasterKit, and 3DLiveVue.

 

GIF Flip Flip (3D Below)

60 LPI GIF Flip Morph Lenticular Photo Frames with Silicone Bands

 Portrait: Size - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

  Landscape: Size - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party Upload and Catalina Bloch)

 GIF Flip Morph Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRXHS1 with 4x6 Media Kit using 59.96 as LPI

 Ink Jet - Canon, Epson, HP and Primera IP60 Photo using 60.04 - 60.12 as LPI

 

Training LA Photo Party link: Morph overview:

https://support.laphotoparty.com/support/solutions/articles/5000858780-create-a-lenticular-print-from-a-morph

GIF Flip Morph Lenticular Photo Frames with Silicone Bands. 60 LPI 4X6 with 4 Inch Lines (10.2x15.2 cm)

 

3D FRAMES (Morph Above)

60 LPI 6 wide X 4 tall with 4 Inch Vertical Lines (10.2x15.2 cm) 3D Lenticular Photo Frames with Silicone Bands.

60 LPI 3D Lenticular Photo Frames with Silicone Bands

  Landscape: Size - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party Upload and Catalina Bloch)

 3D Lenticular - Horizontal / 60 LPI / w = 6 h = 4

 

Graphics created as a Photoshop layered PSD and 3D MasterKit used to convert the image to 3D.

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRXHS1 with 4x6 Media Kit

 Ink Jet - Primera IP60 Photo, Canon, Epson, HP

 

Training: LA Photo Party link: 3D overview:

https://support.laphotoparty.com/support/solutions/articles/5000852772

 

VueThru Lenticular Photo Frames are used around the world at Amusememt Parks, Aquariums, Exhibitons, Corporate Events, Birthday parties.  Any where Event and Photo Booth Photographers are, you can find VueThru Lenticular Photo Frames!

 

No attaching or lamination required, just slide in printed (interlaced) photo.

Nothing Easier than Photo Frames!

 

HS code 3924.90.20 Picture Frame of plastics.

 

These Lenticular Photo Frames and Lenticular Lens with Adhesive have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing video (link below) and with Catalina Viau's Lenticular Module on her Photo Booth Mastery Course. (link below).  Other dye sub photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

*Also see EXHIBITION LENTICULAR MATERIALS for tested Lenticular Materials that work with Lenticular Interlacing Software PhotaMate Pro, 3DMasterKit, and 3DLiveVue.

 

GIF Flip Flip (3D Below)

60 LPI GIF Flip Morph Lenticular Photo Frames with Silicone Bands

 Portrait: Size - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

  Landscape: Size - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party Upload and Catalina Bloch)

 GIF Flip Morph Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRXHS1 with 4x6 Media Kit using 59.96 as LPI

 Ink Jet - Canon, Epson, HP and Primera IP60 Photo using 60.04 - 60.12 as LPI

 

Training LA Photo Party link: Morph overview:

https://support.laphotoparty.com/support/solutions/articles/5000858780-create-a-lenticular-print-from-a-morph

GIF Flip Morph Lenticular Photo Frames with Silicone Bands. 60 LPI 4X6 with 4 Inch Lines (10.2x15.2 cm)

 

3D FRAMES (Morph Above)

60 LPI 6 wide X 4 tall with 4 Inch Vertical Lines (10.2x15.2 cm) 3D Lenticular Photo Frames with Silicone Bands.

60 LPI 3D Lenticular Photo Frames with Silicone Bands

  Landscape: Size - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 Photo Booth Upload Software  (LA Photo Party Upload and Catalina Bloch)

 3D Lenticular - Horizontal / 60 LPI / w = 6 h = 4

 

Graphics created as a Photoshop layered PSD and 3D MasterKit used to convert the image to 3D.

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRXHS1 with 4x6 Media Kit

 Ink Jet - Primera IP60 Photo, Canon, Epson, HP

 

Training: LA Photo Party link: 3D overview:

https://support.laphotoparty.com/support/solutions/articles/5000852772

 

VueThru Lenticular Photo Frames are used around the world at Amusememt Parks, Aquariums, Exhibitons, Corporate Events, Birthday parties.  Any where Event and Photo Booth Photographers are, you can find VueThru Lenticular Photo Frames!

 

No attaching or lamination required, just slide in printed (interlaced) photo.

Nothing Easier than Photo Frames!

 

HS code 3924.90.20 Picture Frame of plastics.

 

60 LPI Lenticular Photo Frames have been tested and shown to work with with DNP DS40, DS620 and RX1 Professional Photo Printers using a 6 inch wide 4x6 Media Kit using Photo Booth Software like LA Photo Party - PBU Software with built in Lenticular Interlacing and Printing. Other dye sub photo printers and Photo Booth Software with Lenticular Interlacing Software may work.  Test Test Test before your event!

 

GIF Flip Morph (3D Below)

60 LPI GIF Flip Morph Lenticular Photo Frames with Silicone Bands

 Portrait: Size - 4 Wide X 6 Tall with 4 Inch Horizontal Lines

 

Popular uses (but not limited to)

 LA Photo Party PBU Software

 PhotaMate Pro Event Photography software using 39.85 as LPI setting

 Triaxes 3D MasterKit software using 39.85 as LPI Setting

 SuperFlip Lenticular Interlacing software using 39.85 as LPI for dye sub printing

 GIF Flip Lenticular - Horizontal / 40 LPI / w = 4 h = 6

 

3D FRAMES (Morph Above)

60 LPI 6 wide X 4 tall with 4 Inch Vertical Lines (10.2x15.2 cm) 3D Lenticular Photo Frames with Silicone Bands.  (3D is always Vertical Lines)

  Landscape: Size - 6 Wide X 4 Tall with 4 Inch Vertical Lines

 

Popular uses (but not limited to)

 LA Photo Party PBU Software

 PhotaMate Pro Event Photography software using 39.85 as LPI setting

 Triaxes 3D MasterKit software using 39.85 as LPI Setting

 3D Lenticular - Horizontal / 60 LPI / w = 6 h = 4

 

Graphics created as a Photoshop layered PSD and converted to 3D using 3D MasterKit Software.

 

Photo Booth Printer (Other Printers may work, Test, Test, Test!)

 Dye Sub - DNP DS40, DS620A, DSRXHS1 with 4x6 Media Kit

 Ink Jet - Primera IP60 Photo, Canon, Epson, HP

 

Portrait GIF or Flips's using 60 LPI with Horizontal Lines may show a smoother Flip transition, but your project may require a Vertical Flip.  The 40 LPI GIF Flip Photo Frames is the better choice for Vertical Flips. We do not recommend 60 LPI for Vertical GIF Flip’s.

 

VueThru Lenticular Photo Frames are used around the world at Amusememt Parks, Aquariums, Exhibitons, Corporate Events, Birthday parties.  Any where Event and Photo Booth Photographers are, you can find VueThru Lenticular Photo Frames! No attaching or lamination required, just slide in printed (interlaced) photo.

Nothing Easier than Photo Frames!

 

 

40 LPI 4x6 with 4 Inch lines are used for Portrait Flip and Morph with Photo Booth Software like PBU for Animation / Morph Lenticular Prints.

No attaching or lamination required, just slide in printed (interlaced) photo, align, and hand ot guest!

 

Nothing Easier than Photo Frames!