•  

The 3D Dinosaur Project was created to teach you the basics of 3D Lenticular Printing.

 

This tutorial explains how to:

• Install 3DMasterKit

https://triaxes.com/3dmasterkit/download/

• Add Layers to 3DMasterKit

• Generate Interlaced Layer and preview

• Save and print your interlaced image

• Attach a 3D Lenticular Lens to the interlaced print

• Use a VueThru 3D Frame (no attaching required)

IMPORTANT NOTE

 

The purpose of our Training Projects is to ensure that your equipment is working correctly and you are properly following the instructions step-by-step. We inform all of our customers that following the interlacing, printing and laminating instructions is critical when working with any lenticular project. Without completing a project, we cannot help diagnose any issues that occur when creating your own lenticular prints. If you successfully complete a Training Project and problems occur with your own project, most likely your artwork is the issue.

 

If you have not already, we suggest purchasing the 3D Dinosaur Target Sample in our 3D & Flip Sample Pack. These samples are used as targets for you to compare your own 3D Dinosaur print after completing the project. If you can successfully replicate the 3D Dinosaur Target Sample, you can continue with your own projects with either the same or similar interlacing settings. Make sure to print with the same print settings as the 3D Dinosaur Project.

Sorry, this content is meant for viewing on a desktop computer!